Question: 21
Which CLI command can you enter to permit or deny IPv6 traffic travelling through an interface?
A. access-list
B. access-group
C. ipv6 access-class
D. ipv6 traffic-filter
Answer: D
Thursday, 10 August 2017
Monday, 17 July 2017
Cisco Just Bought This Networking Security Startup
Cisco is making another play to grow its cybersecurity business.
The systems administration mammoth said Thursday that it intends to purchase security startup Observable Networks. Money related terms of the arrangement were not revealed.
Discernible Networks has practical experience in a security strategy called endpoint displaying that enables organizations to track how individuals utilize gadgets like cell phones that are associated with corporate systems. Organizations can utilize this innovation to decide if those associated gadgets do any irregular conduct like attempting to interface with systems that they should, which can demonstrate that a programmer is altering them.
One conceivable explanation behind Cisco's (csco, +0.48%) enthusiasm for purchasing Observable Networks is that the startup offers its security benefit as a membership. Cisco is as of now upgrading its business to concentrate on offering organizing administrations by membership as its center server farm switch and switch business moderates.
More organizations are purchasing registering assets on request from tech monsters like Amazon (amzn, +0.11%) and Microsoft (msft, +1.35%), which has harmed enormous server farm equipment organizations like Cisco and Hewlett Packard Enterprise (hpe, +0.59%).
In any case, while Amazon Web Services and Microsoft Azure posture challenges for Cisco, the systems administration goliath is additionally discovering approaches to guarantee its innovation functions admirably with those cloud organizations' administrations. For instance, clients can subscribe to Observable Networks' security administration to screen gadgets associated with Amazon Web Services and Microsoft Azure. With Cisco obtaining Observable Networks, clients would now be able to purchase another Cisco-benefit that works with the distributed computing goliaths.
Tuesday, 30 May 2017
300-101 Study Material
Question: 18
An organization decides to implement NetFlow on its network to monitor the fluctuation of traffic that is disrupting core services. After reviewing the output of NetFlow, the network engineer is unable to see OUT traffic on the interfaces. What can you determine based on this information?
A. Cisco Express Forwarding has not been configured globally.
B. NetFlow output has been filtered by default.
C. Flow Export version 9 is in use.
D. The command ip flow-capture fragment-offset has been enabled.
Answer: A
Question: 19
A network engineer is trying to implement broadcast-based NTP in a network and executes the ntp broadcast client command. Assuming that an NTP server is already set up, what is the result of the command?
A. It enables receiving NTP broadcasts on the interface where the command was executed.
B. It enables receiving NTP broadcasts on all interfaces globally.
C. It enables a device to be an NTP peer to another device.
D. It enables a device to receive NTP broadcast and unicast packets.
Answer: A
Question: 20
IPv6 has just been deployed to all of the hosts within a network, but not to the servers. Which feature allows IPv6 devices to communicate with IPv4 servers?
A. NAT
B. NATng
C. NAT64
D. dual-stack NAT
E. DNS64
Answer: C
An organization decides to implement NetFlow on its network to monitor the fluctuation of traffic that is disrupting core services. After reviewing the output of NetFlow, the network engineer is unable to see OUT traffic on the interfaces. What can you determine based on this information?
A. Cisco Express Forwarding has not been configured globally.
B. NetFlow output has been filtered by default.
C. Flow Export version 9 is in use.
D. The command ip flow-capture fragment-offset has been enabled.
Answer: A
Question: 19
A network engineer is trying to implement broadcast-based NTP in a network and executes the ntp broadcast client command. Assuming that an NTP server is already set up, what is the result of the command?
A. It enables receiving NTP broadcasts on the interface where the command was executed.
B. It enables receiving NTP broadcasts on all interfaces globally.
C. It enables a device to be an NTP peer to another device.
D. It enables a device to receive NTP broadcast and unicast packets.
Answer: A
Question: 20
IPv6 has just been deployed to all of the hosts within a network, but not to the servers. Which feature allows IPv6 devices to communicate with IPv4 servers?
A. NAT
B. NATng
C. NAT64
D. dual-stack NAT
E. DNS64
Answer: C
Cisco 300-101 Book PDF Free Download
Tuesday, 2 May 2017
300-101 Sample Practice Questions
Question: 13
When using SNMPv3 with NoAuthNoPriv, which string is matched for authentication?
A. username
B. password
C. community-string
D. encryption-key
Answer: A
Question: 14
A network engineer is configuring a solution to allow failover of HSRP nodes during maintenance windows, as an alternative to powering down the active router and letting the network respond accordingly. Which action will allow for manual switching of HSRP nodes?
A. Track the up/down state of a loopback interface and shut down this interface during maintenance.
B. Adjust the HSRP priority without the use of preemption.
C. Disable and enable all active interfaces on the active HSRP node.
D. Enable HSRPv2 under global configuration, which allows for maintenance mode.
Answer: A
Question: 15
A company's corporate policy has been updated to require that stateless, 1-to-1, and IPv6 to IPv6 translations at the Internet edge are performed. What is the best solution to ensure compliance with this new policy?
A. NAT64
B. NAT44
C. NATv6
D. NPTv4
E. NPTv6
Answer: E
Question: 16
What is a function of NPTv6?
A. It interferes with encryption of the full IP payload.
B. It maintains a per-node state.
C. It is checksum-neutral
D. It rewrites transport layer headers.
Answer: C
Question: 17
A network engineer initiates the ip sla responder tcp-connect command in order to gather statistics for performance gauging. Which type of statistics does the engineer see?
A. connectionless-oriented
B. service-oriented
C. connection-oriented
D. application-oriented
Answer: C
When using SNMPv3 with NoAuthNoPriv, which string is matched for authentication?
A. username
B. password
C. community-string
D. encryption-key
Answer: A
Question: 14
A network engineer is configuring a solution to allow failover of HSRP nodes during maintenance windows, as an alternative to powering down the active router and letting the network respond accordingly. Which action will allow for manual switching of HSRP nodes?
A. Track the up/down state of a loopback interface and shut down this interface during maintenance.
B. Adjust the HSRP priority without the use of preemption.
C. Disable and enable all active interfaces on the active HSRP node.
D. Enable HSRPv2 under global configuration, which allows for maintenance mode.
Answer: A
CISCO Certification 300-101 Practice Exam
Question: 15
A company's corporate policy has been updated to require that stateless, 1-to-1, and IPv6 to IPv6 translations at the Internet edge are performed. What is the best solution to ensure compliance with this new policy?
A. NAT64
B. NAT44
C. NATv6
D. NPTv4
E. NPTv6
Answer: E
Question: 16
What is a function of NPTv6?
A. It interferes with encryption of the full IP payload.
B. It maintains a per-node state.
C. It is checksum-neutral
D. It rewrites transport layer headers.
Answer: C
Question: 17
A network engineer initiates the ip sla responder tcp-connect command in order to gather statistics for performance gauging. Which type of statistics does the engineer see?
A. connectionless-oriented
B. service-oriented
C. connection-oriented
D. application-oriented
Answer: C
CISCO Certification 300-101 Test Questions PDF
Thursday, 2 March 2017
300-101 Sample Question : 12
QUESTION: 12
PPPoE is composed of which two phases?
A. Active Authentication Phase and PPP Session Phase
B. Passive Discovery Phase and PPP Session Phase
C. Active Authorization Phase and PPP Session Phase
D. Active Discovery Phase and PPP Session Phase
Answer: D
PPPoE is composed of which two phases?
A. Active Authentication Phase and PPP Session Phase
B. Passive Discovery Phase and PPP Session Phase
C. Active Authorization Phase and PPP Session Phase
D. Active Discovery Phase and PPP Session Phase
Answer: D
Wednesday, 1 February 2017
300-101 Sample Question : 11
QUESTION: 11
Which protocol uses dynamic address mapping to request the next-hop protocol address for a specific connection?
A. Frame Relay inverse ARP
B. static DLCI mapping
C. Frame Relay broadcast queue
D. dynamic DLCI mapping
Answer: A
Which protocol uses dynamic address mapping to request the next-hop protocol address for a specific connection?
A. Frame Relay inverse ARP
B. static DLCI mapping
C. Frame Relay broadcast queue
D. dynamic DLCI mapping
Answer: A
Thursday, 19 January 2017
300-101 Sample Question : 10
QUESTION: 10
Which protocol uses dynamic address mapping to request the next-hop protocol address for a specific connection?
A. Frame Relay inverse ARP
B. static DLCI mapping
C. Frame Relay broadcast queue
D. dynamic DLCI mapping
Answer: A
Which protocol uses dynamic address mapping to request the next-hop protocol address for a specific connection?
A. Frame Relay inverse ARP
B. static DLCI mapping
C. Frame Relay broadcast queue
D. dynamic DLCI mapping
Answer: A
Subscribe to:
Posts (Atom)


